NOTE: List contains commonly ordered items but is non-exhaustive. Special geometries, cone angles, materials, and designs are available upon request. Contact us
INDENTER HOLDERS AND INDENTATION TIPS
INDENTER HOLDERS
Indenter holder (IH)
Indenter holder insulating (IHI)
Machined from stainless steel with ceramic insert to insulate the indenter electrically.
Compatible with all Alemnis indenter tips
DIAMOND INDENTERS
Room temperature, Berkovich conductive diamond indenter (RTBCD)
Max temperature 320°C, max peak temp. 450°C (3h) in vacuum
Max temperature 200°C in ambient (recommended)
Supplier code: ALS/BERKOVICH/EL
Room temperature, conductive Cubecorner diamond indenter (RTCCD)
Max temperature 320°C, max peak temp. 450°C (3h) in vacuum
Max temperature 200°C in ambient (recommended)
Supplier code: ALS/CUBECORNER/EL
Room temperature, Flatpunch conductive diamond indenter (RTFCD)
Diameter from 2 to 400um, cone angle 60°
Max temperature 320°C, max peak temp. 450°C (3h) in vacuum
Max temperature 200°C in ambient (recommended)
Diameter must be specified at time of order
High Temperature Berkovich conductive diamond indenter (HTBCD)
Max temperature 700°C, max peak temp. 800°C (3h) in vacuum
Max temperature 200°C in ambient (recommended)
High Temperature conductive Cubecorner diamond indenter (HTCCD)
Max temperature 700°C, max peak temp. 800°C (3h) in vacuum
Max temperature 200°C in ambient (recommended)
High Temperature Flatpunch conductive diamond indenter (HTFCD)
Diameter from 2 to 400um, cone 60°
Max temperature 700°C, max peak temp. 800°C (3h) in vacuum
Max temperature 200°C in ambient (recommended)
Ultra-High Temperature Berkovich Tungsten Carbide indenter (UHTBWC)
Max temperature 1’000°C in vacuum
Max temperature 200°C in ambient (recommended)
INDENTERS OF OTHER MATERIALS
Alemnis can provide indenters of other materials (e.g., tungsten carbide, sapphire, ruby, silicon carbide, boron nitride, stainless steel, etc.) on demand. Custom indenter geometries (e.g., spherical, knife, wedge, etc.) are also possible, on request.
Please contact Alemnis for further information: Contact Alemnis